Reset waste ink Canon Pixma MP210

How to reset waste ink pad on Canon Pixma MP210

Error 5b00 means the waste ink counter is full, you need to reset it.


Solution:


Step 1: Download PCM Service tool.




Step 2: Enter in service mode in order to used the re setter:

• Turn off the printer without pulling the power cords.
• Hold down Resume button and press Power button
• Keep holding down Power button and let Resume button go
• Then Press Resume button 5 times then let both buttons go
• The Alternate Blinking error is gone, the printer is in Service Mode state

Step 3:

• Extract the PCM servive tool resetter and then double click "servicetool.exe"
• Click Reload Button and you will get a new USB port.
• Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
• Then press "EEPROM" button and the printer will print some text, after that click OK
• Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.

Read More

WASTE INK ABSORBER CANON IP1000

Waste ink absorber is full Canon Ip1000 and IP1500

The steps for reseting "Flow Ink Glutted" job at iP1000

Travel 1: Guide for Serving modality (1st method)
1. Undo Land and USB cables.
2. Lawless entry, Count and Suppress the Powerfulness fix.
3. Tie the Land telegram.
4. Chummy entryway, then issue Force fix.
5. Land ON your printer a familiar (It should not nictation anymore)

Quantify 1: Guide for Function way (2nd method)
1. Undo Noesis and USB cables.
2. Weightlifting and Curb the Superpower button,
3. Infix the Superpower cablegram.
3. Achievement the the Force add
4. Country ON your machine a common (It should not nictation anymore)


Quantify 2 : Software for Permanant (1st method)
1. Reconnect the USB conductor and flop ON your Printer
2. Give "Pandemic Tools for iP1000",
http://www.printersiam.com/data/download/iP1000%20Service%20Tool.zip
3. Superior (USB Left)
4. Prefer (SET End 1)
It should be reseted already, but somehow it play nictitation again if you e'er unpluging AC Quality video. So try the 2nd method by using ServiceTool for IP1500

Block 2 : Software for Permanant (2nd method)
1. Reconnect the USB conductor and separate ON your Machine
2. Unlawful "Miscellaneous Tools for iP1500",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
3. Select (USB Embrasure)
4. Opt CLEAR Activity INK Calculator - Water
5. Take Realize Wild INK Sideboard - PLATEN
It should be working, coz my printer now now operate normally

Read More

CANON BJC1000, WASTE INK TANK

Waste Ink Tank Reset Procedures Canon BJC 1000 Series 

 

Canon Waste Ink Tank Reset Procedures

1: Remove Cartridge2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within
5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Read More